Nuovo firmware Canon 5d Mark II

| 13/09/2010 | 1.183 Letture |

Canon ha annunciato il nuovo firmware per la 5d Mark II scaricabile sul sito ufficiale.

Dal sito ufficiale (inglese):

This firmware update (Version 2.0.7) incorporates the following improvements and fixes.

  1. Fixes a phenomenon in which the aperture exhibits abnormal movement when shooting movies in manual exposure mode and Aperture Priority AE (Av mode) using some Canon lenses (such as macro lenses).
  2. Fixes a phenomenon in which the exposure level shown in the LCD panel differs from what is shown in the viewfinder when shooting still images in manual exposure mode.
  3. Fixes a phenomenon in which the Wireless File Transmitter (WFT-E4 or WFT-E4 II) may not automatically power off when used for FTP transfers.

These phenomenon only occur with the Version 2.0.4 and Version 2.0.3 firmware.

The Version 2.0.7 firmware being released this time is for cameras with firmware up to Version 2.0.4. If the camera’s firmware is already Version 2.0.7, it is not necessary to update the firmware.

Firmware update procedures

In the following instructions, X.X.X or xxx indicates either the current firmware version or the firmware version for the update.

(1) Format the CF Card

Be sure to carefully review the contents of the CF card before formatting.

Insert CF >Turn Dial >Power On

  • Insert the CF card into the camera and turn the Power Switch <ON>.
  • Press the <MENU> button.
  • Rotate the Main Dial and the Quick Control Dial to select the [Format] item, and press the <SET> button.
  • Rotate the Quick Control Dial to select [OK], and press the <SET> button.
  • Turn the camera <OFF> and remove the CF card from the camera.

(2) Download the firmware update file from this page

Please download the compressed, self-extracting file that matches your computer’s operating system and create the following firmware update file.

  • Extracted Firmware Update File
    • File name : 5d200207.fir
    • File size : 9,754,348 bytes
How to Extract the Firmware Update File
Windows

Double-click the downloaded file.

Dialog

Clicking [OK] will cause the file’s contents to be extracted and the firmware update file to be created.

Macintosh

The downloaded file will automatically self-extract,creating the firmware update file.
In case the downloaded file does not automatically self-extract, double-click the downloaded file.

How to Confirm the File Size
Windows

Right-click the icon of the firmware update file and select the [Properties] command from the pop-up menu that appears.

Macintosh

Select the icon of the firmware update file, and then select the [Get Info] command from the [File] menu.

There are two ways to install the firmware update:
  1. To install from the CF card, follow the procedures outlined in Step 3-1, then bypass Step 4-1 and continue to Step 5.
  2. To install directly from a compatible computer, bypass Step 3-1 and follow the procedures from Step 4-1 onward.

(3-1) Copy the firmware update file to the CF card.

Insert the CF card that has been formatted in the Camera into the CF card reader.
Copy the firmware update file to the first window that appears when the CF card is opened (the root directory).
Remove the CF card from the card reader.

* When removing the CF card, be sure to do so as described in the documentation for the computer or the card reader.
* If the firmware update file is placed in a subfolder of the CF card, the camera will not see it.

(3-2) Start the firmware update.

Rotate the Mode Dial to select <P> mode (or any mode other than Fully-Automatic Modes).

Insert CF> Power On Insert the CF card with the firmware into the camera.

Turn the Power Switch <ON>, and then press the <MENU> button to display the menu.
screen Rotate the Main Dial and the Quick Control Dial to select the “Firmware Ver.x.x.x” item at the bottom of the “Set-up 3 (Yellow)”, and then press the <SET> button.
screen The firmware update screen will appear.

Turn the Quick Control Dial, select [OK], and then press the <SET> button. Follow the procedure from Step (5) onward.

*If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been properly copied to the CF card, so please try again starting from Step (1).

(4-1) Connect the camera and the computer.

Rotate the Mode Dial to select <P> mode (or any mode other than Fully-Automatic Modes).
Insert an CF card that has been formatted in the camera into the camera.
Connect the camera and the computer with the USB cable, and then set the camera’s power switch to <ON>.

(4-2) Start the firmware update.

Start EOS Utility.

screen Click the <Camera settings / Remote shooting> button.

Click <button>,and then click the [Firmware Ver. X.X.X].
screen The firmware update will appear on the computer screen.
Click the [OK] button.

The firmware update file will be copied to the CF card by following the on-screen instructions to select it.

screen The firmware version will appear on the computer screen.

Click the [OK] button.
screen The firmware update will appear on the computer screen.

Click the [OK] button.

Follow the procedure from Step (5) onward on the camera.

(5) Update the firmware.

screen The screen shown on the left will appear on the camera’s LCD monitor.
screen If you press the <SET> button, a confirmation screen will appear, so check the firmware update shown, rotate the Quick Control Dial to select [OK], and press the <SET> button again to start the firmware update.
screen The message on the left will appear during the update.

(6) Complete the firmware update.

screen When the update is completed, the message on the left will appear on the LCD monitor.

Complete the firmware update by pressing the <SET> button.

The firmware update is now completed.

When the firmware update operations are finished, turn the camera <OFF> and remove the battery from the camera for at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the camera is turned on.

Format the CF card before using it again.

If an ERROR message appears during the firmware update
screen If this screen appears, remove the battery and check to make sure that there are no problems with the battery capacity or with the firmware update file on the CF card.

If there are no problems,repeat the update operations again.

If you still have a problem, please contact the Canon Customer Support Center in your region.

Tags: ,

Categoria: Attrezzatura

Discuti su Facebook

«
»